Big Al’s Exclusive One Year Warranty
All our turn/key engines have Al's exclusive One Year Warranty.
We have so much confidence in our quality that our warranty starts when the vehicle
is ready for the road and not when you receive the engine. Al is the only one that will
give you this kind of warranty, so shop with confidence. Over 9,000 have already taken
advantage of this one-of-a-kind warranty.
Please see the Engine Facts page for complete details.

We are now manufacturing all our engines with roller cams and lifters. Government regulations have made it much harder to get oil with the proper zinc content for flat tappet cams. New car manufacturers have been switching to roller cams and lifters too for the same reason. As a side benefit from the upgrade you will also see a horsepower boost.

All our engines are designed to run on 91 and up octane pump gas.

Featured Engine Sale

SHOW TIME!!!
Blown & Injected
Pro/Street 632 Big Block Chevy
930 HP

Polished Dart Aluminum Block and Heads, 1471 Billet, Blowershop Supercharger, Electronic Fuel Injected.

Turnkey Regular Price $45,750
Featured 632 Big Block Chevy Engine Sale Price $36,750.00
Only one available at this price.
SAVE $9,000!!!!

Featured Big Block Engine Sale

Bad Ass 632 Big Block Chevy
1,306+ HP @ 6,431 rpm
1166 ft lbs Torque @ 4,521 rpm

Dart Block, Callies Magnum Crank, Callies Super H-Beam Steel Rods, JE Forged 8.5 to 1 Compression Pistons, File Fit Rings, Comp Cams Roller Cam 702/714-276/282, Polished CNC 355 Dart Pro 1 Heads, Manley Stainless Steel Valves, Comp Cams Springs, Chrome Moly Retainers and Locks, Polished Blowershop Intake, BDS 1471 Pro Lock Supercharger, Pair of 1250 Ultra Dominator Carbs, MSD Ignition, Linkage, Fuel Lines, Funny Car Style Belt Guard, Dual Carb Scoop with K&N Filters, Polished High Flow Water Pump and Billet Overdrive Pulley, MSD Crank Trigger Ignition, Set up, Run, Synchronized and Dynoed.

Turnkey Regular Price $39,750
Featured 632 Big Block Chevy Engine Sale Price $32,750.00
Only one available at this price.
SAVE $7,000!!!!

Featured Small Block Engine Sale

Little Bad Ass Chevy 408 Cubic Inch
748 HP @ 6,245 rpm
611 ft lbs of Torque @ 4,318 rpm

408 Small Block Chevy, Dart SHP Block, Eagle 4340 Double Keyed Stroker Crank, H-Beam Steel Rods, SRP 8.5 to 1 Compression Pistons, File Fit Speedpro Rings, H Series Rod and Main bearings, Melling High Pressure Oil Pump, Moroso Oil Pan, Comp Cams 652/652 Roller Cam, Comp Roller Lifters, Comp Pushrods, Polished Aluminum Timing Cover, Polished 64cc Aluminum Heads, Maney Stainless Steel Valves, Comp Cams Springs, Chrome Moly Retainers and Locks, ARP Screw-in 7/16 Studs and Guideplates, Comp Cams Chrome Moly Roller Rockers, Jomar Stud Girdles, Polished Aluminum Valve Covers, Billet Breathers, Polished Raised Port Blowershop Intake, Polished BDS Airlock 871 Supercharger, Funnycar Style Belt Guard, SFI Balancer, Polished Aluminum Waterpump, Pair of Holley 750 Boost Reference Blower Carbs, Linkage, Fuel Lines, Polished BDS Dual Carb Scoop with K&N Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.

Turnkey Regular Price $14,500
Featured 408 Small Block Chevy Engine Sale Price $13,500
Only 12 available at this price.
SAVE $1,000!!!!

Sold to: Steve Hermanowski, South Windsor, CT
ONLY 11 LEFT

Check back often, new engines are added frequently. Click on the engines for an enlarged view. Scroll down, there are a lot more engines below.

All These Engines are Pro/Street and Run on 93 Octane Pump Gas.

Don’t see what you want here?
We can build naturally-aspirated or supercharged engines for street, race or marine applications to your specs. Just call with your request.

You can upgrade any engine with
Edelbrock Carbs to Holley Carbs for only $650.00 extra.

All our engines now include Roller Cam and Lifters instead of Flat Tappet Hydraulic Cam and Lifters.

We crate these engines so they will not get damaged even if we ship them around the world.
Ultimate Bad Ass
632 Big Block Chevy
1,243 HP @ 6,286 rpm
1134 ft lbs Torque @ 4698rpm

Dart Block, 4340 Eagle Stroker Crank, H-Beam Steel Rods, JE Forged 8.5 to 1 Compression Pistons, File Fit Rings, Comp Cams Roller Cam 702/714-276/282, Polished 345 Dart Pro 1 Heads, Manley Stainless Steel Valves, Comp Cams Springs, Chrome Moly Retainers and Locks, Polished Blowershop Intake, BDS 1071 Pro Lock Supercharger, Pair of 1250 Ultra Dominator Carbs, MSD Ignition, Linkage, Fuel Lines, Funny Car Style Belt Guard, Dual Carb Scoop with K&N Filters, Polished High Flow Water Pump and Billet Overdrive Pulley, Set up, Run, Synchronized and Dynoed.
$38,750 Turn/Key #554A
Pro/Street 355 Chevy
547 Horsepower, GM 350 4-Bolt Main Block, Double Keyed Eagle Cast Steel Crank and Aftermarket Balancer, Complete Rotating Assembly Balanced, 8 to 1 Compression Forged Blower Pistons, ARP Main Bolts, Eagle Rods, Comp Cams Hydraulic Roller Cam and Lifters, Satin Finished 64cc Aluminum Heads, Satin Finished Intake, ARP Head Bolts, 202-160 Manley Stainless Steel Valves, Comp Cams Springs, Chrome Moly Retainers & Locks, ARP Screw In Studs, Comp Cams Guideplates, Comp Cams Pushrods, Stainless Steel Roller Rockers, Polished 671 Supercharger, 750 Edelbrock Carbs, Linkage, Fuel Lines, Mallory Ignition, Dual Carb Scoop, Funnycar Style Belt Guard, Set up, Run, Synchronized and Dynoed.
$9,232.00 Turn/Key #555A
Add $150.00 for Aluminum Oil Pan, Timing Cover and Valve Covers instead of Chrome.
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block
Pro/Street Phase I Plus
547 Horsepower, 355 Chevy Small Block, GM 350 4-Bolt Main, Double Keyed Eagle Cast Steel Crank and Aftermarket Balancer, Eagle Rods, Complete Rotating Assembly Balanced, Comp Cams Hydraulic Roller Cam and Lifters, Forged 8 to 1 Compression Blower Pistons, Polished 202/160 64cc Aluminum Heads, Stainless Steel Roller Rockers, Polished Intake, Polished 671 Supercharger, Funnycar Style Belt Guard, 750 Edelbrock Carbs, Linkage, Fuel Lines, Dual Carb Scoop and Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$9,632.00 Turn/Key #556
Add $150.00 for Aluminum Oil Pan, Timing Cover and Valve Covers instead of Chrome.
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
Pro/Street 355 Phase I Plus
555 Horsepower, GM 350 - 4-Bolt Main Block Bored .030, Forged 8 to 1 Compression Blower Pistons, Aftermarket Balancer and Double Keyed Eagle 4340 Forged Steel Crank, Eagle Rods, Complete Rotating Assembly Balanced, Comp Cams Hydraulic Roller Cam and Lifters, Polished 64cc Aluminum Heads, Roller Rockers, Screw-in Studs and Guide Plates, Polished Intake, Polished 671 Supercharger, 2 Edelbrock 750 Carbs, Linkage, Funnycar Style Belt Guard, BDS Scoop with K&N Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$10,360.00 Turn/Key #557
Add $150.00 for Aluminum Oil Pan, Timing Cover and Valve Covers instead of Chrome.
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
559A
Pro/Street 383 Stroker
566 Horsepower, 383 Small Block Chevy, GM 350 - 4-Bolt Main Block with ARP Main Bolts, Double Keyed Eagle Cast Steel Stroker Crank, Eagle Rods, Comp Cams Hydraulic Roller Cam and Lifters, Double Roller Timing Chain and Gears, Polished Aluminum Timing Cover, Polished Aluminum Finned Oil Pan, Double Keyed Pro Products Balancer, Complete Rotating Assembly Balanced, Forged 8.2 to 1 Compression Blower Pistons, File Fit Moly Rings, Polished 64cc Aluminum Heads with Manley Stainless Steel Valves, Chrome Moly Retainers and Locks, Comp Cams Springs, ARP Screw-in 7/16 Studs, Stainless Steel Roller Rockers, Polished Aluminum Valve Covers, Polished Intake with Stainless Hardware, Polished 671 Supercharger, 3 Inch Drive Pulleys and Belt, 2 Edelbrock 750 Carbs, Linkage, Fuel Lines, Funnycar Style Belt Guard, Polished Dual Carb Scoop with K&N Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$10,760.00 Turn/Key #558A
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
555 Inch Pro/Street
Bad Ass Big Block Chevy
918 Horsepower
@ 6269 rpm
Dart 4-Bolt Main Block, Eagle Double Keyed 4340 Forged Steel Crank, Eagle H-Beam Steel Rods, Forged 8.5 to 1 Compression Pistons, File Fit Rings, Comp Cams 673/673 Roller Cam, Roller Lifters, Double Roller Timing Chain and Gears, Polished Aluminum Timing Cover, Moroso 7 Qt Oil Pan, Polished 360 cc CNC Ported Aluminum Heads, Manley Stainless Steel Valves, 10° Chrome Moly Retainers and Locks, Comp Cams Springs, ARP Screw in Studs, Comp Cams Chrome Moly Roller Rockers, ARP Head Bolts, Jomar Stud Girdles, Polished Cast Aluminum Valve Covers, BDS Polished Intake with Stainless Hardware, BDS Airlock 871 Supercharger, 2 Holley 950 Boost Reference Blower Carbs, Funnycar Style Belt Guard, Linkage Fuel Lines, BDS Dual Carb Scoop with K&N Filters, Set up, Run, Synchronized and Dynoed.
$19,500.00 Turn/Key #559A
Super Bad Ass
496 Stroker Big Block Chevy

830 Horsepower @ 6,468 rpm, 762 ft lbs of Torque, Entire Engine is Blueprinted and Internally Balanced, 4 Bolt Main Block, 4340 Forged Steel Stroker Crank, 4340 H-Beam Steel Rods, JE Forged 8.5 to 1 Compression Pistons, File Fit Rings, Comp Cams 673/673 Roller Cam & Roller Lifters, Roller Timing Chain & Gears, Polished 115 cc Rectangular Port Aluminum Heads, Manley Stainless Steel Valves, Comp Cams Springs, ARP 7/16 Screw In Studs and Head Bolts, Jomar Stud Girdles, Polished Blowershop Intake, BDS Airlock 871 Supercharger, Pair of 950 Boost Reference Blower Carbs, MSD Ignition, Linkage, Fuel Lines, Funny Car Style Belt Guard, Dual Carb Scoop with Filters, Set up, Run, Synchronized and Dynoed.
$16,800.00 Turn/Key #561A
454 Phase 1 Plus
652 Horsepower, Bored .060 to 468 Cubic Inch, Eagle Cast Steel Crank, Eagle 7/16 Rods, Comp Cams 650/650 Roller Cam and Lifters, Complete Rotating Assembly Balanced, Polished Aluminum Heads, Manley Stainless Steel Valves, Comp Cams Valve Springs, 10° Chrome Moly Retainers & Locks, Chrome Moly Pushrods, Jomar Stud Girdles, Polished Intake, 671 Supercharger, Belt Guard, Holley 750 Blower Carbs, Linkage, Fuel Lines, BDS Scoop, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$12,450.00 Turn/Key #562
540 Pro/Street
900 Horsepower, 540 Cubic Inch Big Block Chevy, Dart 4-Bolt Main Block, Callies Magnum Crank, Aftermarket Balancer, Callies Super H Beam Steel Rods, Complete Rotating Assembly Balanced, 8.5 to 1 Compression JE Forged Pistons, File Fit Rings, Billet 650/650 Comp Roller Cam, Roller Lifters, Double Roller Comp Timing Chain and Gears, Polished Dart Pro 1 Aluminum Heads, Manley 225/188 Stainless Steel Valves, Comp Cams Valve Springs, Chrome Moly 10° Retainers and Locks, ARP Screw In Studs and Guideplates, Jomar Stud Girdles, ARP Headbolts, Comp Cams Pro Magnum Chrome Moly Roller Rockers, Polished Intake, Stainless Hardware, 871 Supercharger, 3 Inch Drive Pulleys and Belt, Polished Waterpump with Overdrive Waterpump Pulley, Funnycar Style Belt Guard, 2-950 Holley Boost Reference Blower Carbs, Linkage, Fuel Lines, Set of 4 of Big Al Breathers, BDS Scoop with K&N Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$24,500.00 Turn/Key #563A

Bad Ass 434 Inch
Small Block Chevy

600+ Horsepower, Dart Little M 400 Block, Eagle Stroker 4340 Forged Steel Crank, Eagle H Beam Steel Rods, JE 10.5 to 1 Compression Forged Pistons, File Fit Rings, 630/630 Comp Roller Cam & Lifters, Moroso Stroker Oil Pan, Polished 64cc - 210cc Runner Aluminum Heads, Manley Stainless Steel Valves, Comp Cams Springs, Chrome Moly Retainers & Locks, ARP Screw In Studs and Guideplates, ARP Head Bolts, Jomar Stud Girdles, Polished Single Plane Intake, Holley 850 Double Pumber Carb, Mallory Distributor, Comp Cams Chrome Moly Roller Rockers, Comp Cams Double Roller Timing Chain and Gears, Polished Aluminum Timing Cover, Manley .120 Wall Chrome Moly Pushrods, Cast Aluminum Polished Valve Covers with 4 Billet Breathers, Set up, Run, Synchronized and Dynoed.
$8,995.00 Turn/Key #564A

Phase IV 355
610 Horsepower, GM 4-Bolt Main, 4340 Steel Crank, H Beam Rods, Complete Rotating Assembly Balanced, 652/652 Comp Cams Roller Cam, Polished 202-160 64cc Aluminum Heads, Manley Stainless Steel Valves, Comp Cams Springs, 10° Chrome Moly Retainers & Locks, Jomar Stud Girdles, Chrome Moly Pushrods, Polished 871 Supercharger, Holley 750 Blower Carbs, Belt Guard, Mallory Ignition, Set up,
Set up, Run, Synchronized and Dynoed.
$12,875.00 Turn/Key #565
Add $150.00 for Aluminum Oil Pan, Timing Cover and Valve Covers instead of Chrome.
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
383 Stroker Small Block Chevy
620 Horsepower, GM 4-Bolt Main Block, 4340 Steel Crank, Complete Rotating Assembly Balanced, H-Beam Steel Rods, 652/652 Comp Roller Cam, Lifters and Stainless Steel Roller Rockers, Jomar Stud Girdles, Polished Aluminum Heads, Polished 671 Supercharger, Holley 750 Blower Carbs, Belt Guard, Mallory Ignition, BDS Scoop with K&N Filters, Set up, Run, Synchronized and Dynoed.
$13,250.00 Turn/Key #568
Add $150.00 for Aluminum Oil Pan, Timing Cover and Valve Covers instead of Chrome.
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
Pro/Street 440 Mopar
722 Horsepower, Bored .030 Forged 8 to 1 Compression, 4340 Forged Steel Crank and Aftermarket Balancer, Complete Rotating Assembly Balanced, H-Beam Steel Rods, Polished Aluminum Heads, Comp Cams, Billet Roller Cam, Roller Lifters and Shaft-type Chrome Moly Roller Rockers, Polished Water Pump Housing, Water Pump, Polished Intake, Polished 871 Supercharger, Holley 950 Blower Carbs, Linkage, Fuel Lines, Funnycar Style Belt Guard, Polished Scoop with K&N Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$13,975.00 Turn/Key #569
Pro/Street 427 Big Block Chevy
688 Horsepower, 427 4-Bolt Main Block, Steel Crank, Aftermarket Balancer, Complete Rotating Assembly Balanced, Comp Cams Roller Cam, Roller Lifters and Pro Magnum Roller Rockers, Jomar Stud Girdles, Polished 115cc Aluminum Heads, Manley Valves. Polished Intake, BDS 871 Supercharger, Funnycar Style Belt Guard, Holley 750 Blower Carbs, Linkage, Fuel lines, BDS Dual Carb Scoop, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$13,750.00 Turn/Key #570
602
354 Chrysler Hemi
520 Horsepower, Steel Crank, Aftermarket Balancer, ARP Rod Bolts, Complete Rotating Assembly Balanced, Ross Forged Blower Pistons, Comp Cams Hydraulic Roller Cam and Lifters, Polished Intake, Polished Aluminum Valve Covers and Valleypan, Polished 671 Supercharger, Holley 750 Blower Carbs, Belt Guard, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$16,750.00 Turn/Key #572
540 Pro/Street
914 Horsepower, 540 Cubic Inch Big Block Chevy, Dart 4-Bolt Main Block, Eagle 4340 Forged Steel Crank, Aftermarket Balancer, 4340 H Beam Steel Rods, Complete Rotating Assembly Balanced, 8.5 to 1 Compression JE Forged Pistons, File Fit Rings, Billet 650/650 Comp Roller Cam, Roller Lifters, Double Roller Comp Timing Chain and Gears, Polished 115cc Aluminum Heads, Manley 225/188 Stainless Steel Valves, Comp Cams Valve Springs, Chrome Moly 10° Retainers and Locks, ARP Screw In Studs and Guideplates, Jomar Stud Girdles, ARP Headbolts, Comp Cams Pro Magnum Chrome Moly Roller Rockers, Polished Intake, Stainless Steel Hardware, 871 Supercharger, 3 Inch Billet Drive, Pulleys and Belt, Funnycar Style Belt Guard, 2-950 Holley Boost Reference Blower Carbs, Linkage, Fuel Lines, BDS Scoop with K&N Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$18,500.00 Turn/Key #573B
392 Chrysler Hemi
586 Horsepower, 1957 Chrysler Block Bored .030 to 398 Cubic Inch, Keith Black Blower Pistons, ARP Rod Bolts, Double Keyed Steel Crank and Balancer, Complete Rotating Assembly Balanced, Polished Aluminum Valve Covers, Polished Valleypan and Timing Cover, Comp Cams Roller Cam and Lifters. Adjustable Rockers, Polished Intake, 871 BDS Supercharger, Holley 750 Blower Carbs, Linkage, Fuel Lines, Belt Guard, Mallory Ignition, BDS Scoop and K&N Filters, Set up, Set up, Run, Synchronized and Dynoed.
$19,750.00 Turn/Key #574
Add $510.00 to Upgrade to H Beam Steel Rods.
Pro/Street 427 Inch
FORD Stroker

720 Horsepower, Blueprinted 351 Windsor Block, Main Girdle, 4340 Double Keyed Steel Crank, H-Beam Steel Rods, Forged 8.5 to 1 Compression Pistons, File Fit Rings, H-Series Clevite Bearings, Complete Rotating Assembly Balanced, Comp Cams 660/660 Roller Cam, Roller Lifters, Double Roller Timing Chain and Gears, Aluminum Waterpump and Billet Overdrive, Waterpump Pulley, Polished Edelbrock Victor Jr. Aluminum Heads, Comp Cams Valve Springs, Retainers and Locks, ARP Head Bolts, ARP Screw In Studs and Guide Plates, Comp Cams Stainless Steel Roller Rockers, Jomar Stud Girdles, Ford Racing Cast Aluminum Valve Covers, Mallory Ignition, Polished Intake, Polished 871 Supercharger, 3" Drive, Pair of Holley 750 Boost Reference Blower Carbs, Linkage, Fuel Lines, Funnycar Style Beltguard, BDS Dual Carb Scoop with K&N Filters, Set up, Run, Synchronized and Dynoed.
$16,850.00 Turn/Key #575B

540 Pro/Street Big Block Chevy
700 Horsepower, 723 Ft. Lbs. Torque, Dart 4 Bolt Main Block, 4340 Forged Steel Crank, H-Beam Steel Rods,Forged 10.5 To 1 Compression, Complete Assembly Blue Printed And Internal Balanced, Comp Cams 652/652- 262/262 Roller Cam And Lifters, Comp Cams Double Roller Timing Chain And Gears, Polished Aluminum Timing Cover, Moroso 7 Qt. Oil Pan, Sfi Balancer, Polished Rectangular Port Aluminum Heads With Manley Stainless Steel Valves, Comp Cams Valve Springs, 10° Chrome Moly Retainers And Locks, Jomar Stud Girdles, Polished Aluminum Valve Covers, Polished Aluminum Intake, 950 Holley Carb, Electronic Ignition, Set up, Run, Synchronized and Dynoed.
$12,375.00 Turn/Key #576A
Pro/Street 454 Big Block Chevy Phase I
650 Horsepower, Bored .030 to 461 Cubic Inch, Aftermarket Balancer and Double Keyed Eagle Cast Steel Crank, Eagle 7/16 Rods, Complete Rotating Assembly Balanced, Forged 8.2 to 1 Compression Pistons, Comp Cams 650/650 Roller Cam, Roller Lifters and Stainless Steel Roller Rockers, 115cc Polished Rectangular Port Aluminum Heads, Jomar Stud Girdles, Manley Valves, 10° Chrome Moly Retainers and Locks, Polished Intake, Polished 671 Supercharger, 2 Holley 750 Carbs, Linkage, Funnycar Style Belt Guard, Dual Carb Scoop, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$11,850.00 Turn/Key #577
468 - 4 Bolt Main
750 Horsepower, Eagle 4340 Forged Steel Crank, H-Beam Steel Rods, Forged 8.2 to 1 Compression, 650/650 Comp Roller Cam, Complete Rotating Assembly Balanced, Lifters and Roller Rockers, Polished Aluminum Heads, Jomar Stud Girdles, Polished Intake, 871 Supercharger, Funny Car Style Belt Guard, 950 Holley Blower Carbs, Mallory Ignition, BDS Scoop with K&N Filters, Set up, Run, Synchronized and Dynoed, Engine Transport Stand.
$14,000.00 Turn/Key #579
Pro/Street 468 Big Block
735 Horsepower @ 6,256 rpm, 645 ft lbs of Torque @ 4,944 rpm, Eagle Cast Steel Crank, Eagle 7/16 Rods, Comp Cams 650/650 Roller Cam, Roller Lifters, Complete Rotating Assembly Balanced, Speedpro 8.5 to 1 Compression Forged Pistons, Polished Aluminum Heads, Jomar Stud Girdles, Manley Valves, Comp Cams Chrome Moly Retainers & Locks, Comp Cams Springs, Roller Rockers, Polished Intake, 871 Supercharger, 3” Drive, Holley 950 Blower Carbs, Linkage, Fuel Lines, Polished Scoop with K&N Filters, Funnycar Style Belt Guard, Mallory Distributor, Set up, Run, Synchronized and Dynoed.
$12,650.00 Turn/Key #580A
350 Chevy Bored .030 to 355 Cubic Inch
400 Horsepower, GM Block Aftermarket Balancer, Eagle Cast Steel Crank and Eagle Rods, Complete Rotating Assembly Balanced, 9 1/2 to 1 Compression Pistons, Moly Rings, Comp Cams Hydraulic Roller Cam and Lifters, Stainless Steel Valves, Z28 Springs, Chrome Moly Retainers and Locks, Chrome Oil Pan, 202/160 Aluminum Heads, Timing Cover and Valve Covers, Roller Rockers, Dual Plane Intake, Edelbrock 600 Electric Choke Carb, Electronic Ignition, Manual Fuel Pump, Set up, Run, Synchronized and Dynoed.
$4,895.00 Turn/Key #581A
Add $150.00 for Aluminum Oil Pan, Timing Cover and Valve Covers instead of Chrome.
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
471 Supercharged 355 Chevy Small Block
Having a firewall clearance problem? This engine really helps since the back of the blower is 2" shorter than a 671 Supercharger. 498 Horsepower, Studded Main GM 350 Block with Forged 7 1/2 to 1 Compression Blower Pistons, Comp Cams Hydraulic Roller Cam and Lifters, Complete Rotating Assembly Balanced, Double Keyed Eagle Cast Steel Crank and Aftermarket Balancer, Eagle Rods, Satin Finished 64cc Aluminum Heads, Roller Rockers, Polished 471 Supercharger with Billet Endplates and Drive, 3" Belt, Funny Car Style Belt Guard, Holley Blower Carb, BDS Scoop, with K&N Filter, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$8,432.00 Turn/Key #583
Add $150.00 for Aluminum Oil Pan, Timing Cover and Valve Covers instead of Chrome.
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
Phase II Plus 355
Pro/Street Small Block Chevy

565 Horsepower, GM 350 4-Bolt Main, 4340 Steel Crank, 8.2 to 1 Compression Blower Pistons, Comp Cams 652/652 Roller Cam, Roller Lifters and Stainless Steel Roller Rockers, Complete Rotating Assembly Balanced, Aluminum 202-160 Heads, Manley Valves, Jomar Stud Girdles, Polished Intake, BDS 671 Supercharger, Holley 750 Blower Carbs, Linkage, Fuel Lines, BDS Polished Scoop with K&N Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$11,550.00 Turn/Key #585
Add $150.00 for Aluminum Oil Pan, Timing Cover and Valve Covers instead of Chrome.
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
402 Chevy Big Block
575 Horsepower, Bored .030 to 408 Cubic Inch, Steel Crank, Double Keyed, Aftermarket Balancer, Complete Rotating Assembly Balanced, Comp Cams, 650/650 Roller Cam, Roller Lifters and Roller Rockers, Polished Aluminum Heads, Jomar Stud Girdles, Polished Intake with Stainless Hardware, Polished 671 Supercharger, 3” Billet Drive, Edelbrock 750 Carbs, Linkage, Fuel Lines, Mallory Ignition, Funny Car Style Belt Guard, BDS Dual Carb Polished Scoop and K&N Filters, Set up, Run, Synchronized and Dynoed.
$11,750.00 Turn/Key #587
355 Chevy
548 Horsepower, GM 350 4-Bolt Main, Black Forged 8 to 1 Compression Blower Pistons, Double Keyed Eagle Cast Steel Crank, Eagle Rods, Aftermarket Balancer, Complete Rotating Assembly Balanced, Comp Cams Hydraulic Roller Cam and Lifters, Polished 202/160 Aluminum Heads, Roller Rockers, Polished Intake, BDS 671 Supercharger, Funnycar Style Belt Guard, Edelbrock 750 Carbs, Linkage, Fuel Lines, BDS Scoop with K&N Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$9,782.00 Turn/Key #588
Add $150.00 for Aluminum Oil Pan, Timing Cover and Valve Covers instead of Chrome.
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
Pro/Street 406 Cubic Inch
Small Block Chevy

663 Horsepower, Dart 4-Bolt Main Block 4340 Steel Crank, Aftermarket Balancer, 4340 Steel Rods, SRP Forged Blower Pistons, 652/652 Comp Roller Cam & Lifters, Complete Rotating Assembly Balanced, Polished 200cc Intake Runner/202/160 Aluminum Heads, Manley Valves, Chrome Moly Retainers & Locks, Stainless Comp Cams Roller Rockers, Jomar Stud Girdles, Blower Shop Raised Port Polished Intake, Polished Blower Shop 671 Supercharger, 2 Holley 750 Blower Carbs, Linkage, Fuel Lines, Dual Carb Blower Shop Scoop with K&N Filters, Funny Car Style Belt Guard, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$14,050.00 Turn/Key #590A
Add $150.00 for Aluminum Oil Pan, Timing Cover and Valve Covers instead of Chrome.
355 Chevy Small Block
555 Horsepower, GM 4-Bolt Main Steel Crank, Forged SRP Blower Pistons, Aftermarket Balancer, Complete Rotating Assembly Balanced, Comp Cams 650/650 Roller Cam, Roller Lifters and Stainless Steel Roller Rockers, Iron Eagle Dart 202-160 Heads, Manley Stainless Steel Valves, Chrome Moly Retainers and Locks, Jomar Stud Girdles, Blower Shop 671 Supercharger, Holley 750 Blower Carbs, BDS Scoop with K&N Filters, Linkage, Fuel Lines, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$11,800.00 Turn/Key #591
Add $150.00 for Aluminum Oil Pan, Timing Cover and Valve Covers instead of Chrome.
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
Pro/Street 354 Chrysler Hemi
540 Horsepower, Bored .030 to 361 Cubic Inch, Ross Custom Blower Pistons, Steel Crank, Aftermarket Balancer, ARP Rod Bolts, Complete Rotating Assembly Balanced, Moroso Oil Pan, Comp Cams Hydraulic Roller Cam and Lifters, Stainless Steel Valves, Chrome Moly Retainers & Locks, Polished Intake, Polished Aluminum Valve Covers and Valleypan, 4 Breathers, Polished Blower Shop 871 Supercharger, 3” Drive, 2 Holley Blower Carbs, Linkage, Fuel Lines, Funny Car Style Belt Guard, Taylor Plug Wires, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$17,7500.00 Turn/Key #592A

594
ALL NEW Ultimate 572 Inch
All Aluminum Chrysler Hemi

1057 Horsepower
1015 ft lbs of Torque @ 6,270rpm

Parts Include: Polished Aluminum Mopar Performance 426 Hemi Block, Eagle 4340 Steel Stroker Crank, Eagle H Beam Steel Rods, Complete Rotating Assembly Balanced, JE Custom Forged 8 to 1 Compression Blower Pistons, JE Plasma Moly File Fit Rings, Double Roller Timing Chain and Gears, Moroso Oil Pan, 667/654, 289/297 Comp Cams Billet Roller Cam, Roller Lifters, Mopar Performance Polished Aluminum Heads, Stainless Steel Valves, Chrome Moly Retainers and Locks, Comp Cams Springs, Comp Cams Hardened Pushrods, Roller Rockers, Anodized Billet Rocker Stands, Mopar Performance Rocker Shafts, Mopar Performance Valve Covers, Polished Mopar Performance Waterpump, Polished Overdrive Waterpump Pulley, Polished BDS Blower Intake, Billet 1471 Blower Shop Supercharger, 3 Inch Billet Drive, Funny Car Style Belt Guard, Holley 1250 Ultra Dominator Carbs, Linkage, Fuel Lines, Dual Carb Scoop with K&N Filters, Mallory Ignition, Taylor Plug Wires. Set up, Run, Synchronized and Dynoed.
$35,000.00 Turn/Key #593A
SALE $32,000.00
472 Inch Pro/Street
Phase I Plus Big Block Chevy

760 Horsepower, 472 Inch Big Block Chevy, 4340 Steel Crank, 4340 H-Beam Steel Rods, Comp Cams 650/650 Roller Cam and Lifters, Complete Rotating Assembly Balanced, 8.2 to 1 Compression Forged SRP Pistons, Polished 115 CC Aluminum Heads, Manley Stainless Steel Valves, Chrome Moly 10° Retainers & Locks, Comp Cams Springs, Hardened Pushrods, Comp Cams Pro Magnum Stainless Steel Roller Rockers, Polished Intake with Stainless Hardware, Jomar Stud Girdles, BDS 871 Supercharger, 3 Inch Billet Drive Pulley and Belt, Pair of Holley 950 Blower Carbs,Linkage, Fuel Lines, Funny Car Style Beltguard, BDS Dual Carb Scoop, K&N Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$14,500.00 Turn/Key #594A
595
597a
Pro/Street 545 Ford Stroker
933 Horsepower @ 6,483 rpm
on 93 Octane Pump Gas

460 Ford Block, Main Girdle, 4340 Steel Stroker Crank, H Beam Steel Rods, Complete Rotating Assembly Balanced, Mahl 8.5 to 1 Compression Forged Pistons, Plasma Moly File Fit Rings, Comp Cams Billet Roller Cam & Lifters, Polished CNC Ported Aluminum Heads, Manley Stainless Steel Valves, Chrome Moly Retainers & Locks, Comp Cams Springs, Comp Cam Pro Magnum Stainless Steel Roller Rockers, Jomar Stud Girdles, Polished BDS Intake Manifold, Billet 1,071 Blowershop Teflon Stripped Supercharger, 3” Drive, Funny Car Style Beltguard, Pair of Holley 1,050 Ultra Dominator Carbs, Mallory Ignition, Monster Scoop with K&N Filters, Waterpump with Overdrive Waterpump Pulley, Set up, Run, Synchronized and Dynoed.
$22,500.00 Turn/Key #595A
Bad Ass 572 Cubic Inch Hemi
1107 HP @ 6,372 rpm
1027 ft lbs of Torque @ 4,762 rpm

Blueprinted Mopar Performance 426 Block, 4340 Forged Steel Crank, H Beam Steel Rods, JE Forged 8.5 To 1 Compression Pistons, File Fit Rings, Comp Cams 667/654 – 258/266 Solid Roller Cam and Lifters, Polished Aluminum Mopar Performance Heads, Manley Severe Duty Stainless Steel Valves, Comp Cam Springs, Indy Cylinder Heads, Complete Roller Rocker Assembly, Polished Cast Aluminum Valve Covers, Polished BDS Intake, BDS 1471 Supercharger, Pair of Holley 1250 Dominator Carbs, Linkage & Fuel Lines, Monster Scoop With K&N Filters, Funny Car Style Beltguard, Waterpump and Billet Overdrive Waterpump Pulley, Set up, Run, Synchronized and Dynoed.
$28,995.00 Turn/Key #597B
Watch Engine 597B on the Dyno.
596
Pro/Street 477 Cubic Inch Big Block Chevy
818 Horsepower, 4-Bolt Main, ARP Main Bolts, 4340 Steel Crank, 4340 H-Beam Steel Rods, Complete Rotating Assembly Balanced, Forged JE 8.5 to 1 Compression Pistons, Entire Assembly, Internal Balanced, Comp Cams 650/650 Roller Cam & Lifters, Polished Rectangular Port Aluminum Heads, ARP Head Bolts, Manley Stainless Steel Valves, Chrome Moly 10° Retainers & Locks, Comp Cams Valve Springs, Jomar Stud Girdles, Chrome Moly Pushrods, Comp Cams Guideplates, Comp Cams Pro Magnum Stainless Steel Roller Rockers, Polished Intake with Stainless Hardware, 871 Supercharger, 3” 8mm Drive, Pair of Holley 950 Blower Carbs, Linkage, Fuel Lines, Funnycar Style Belt Guard, BDS Dual Carb Scoop with K&N Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$15,000.00 Turn/Key #598B
Pro/Street Big Block Chevy
558 Horsepower, 454 Block Bored .030 to 461 Cubic Inch, Eagle Cast Steel Crank, Eagle 7/16 Rods, Complete Rotating Assembly Balanced, Forged 10 to 1 Compression Pistons, Moly Rings, Comp Cams 622/622 Roller Cam, Roller Lifters, Double Roller Timing Chain & Gears, Polished Aluminum Timing Cover, Chrome Oil Pan, Aftermarket Balancer, Polished 325cc Runner Aluminum Rectangular Port Heads, 115cc Chamber, Manley Stainless 225-188 Valves, Comp Cams Valve Springs, 10° Chrome Moly Retainers and Locks, ARP Head Bolts, Comp Cams Guideplates, Comp Cams Pro Magnum Stainless Steel Roller Rockers, Jomar Stud Girdles, Chrome Valve Covers, Polished Rectangular Port Intake, 950 Holley Carb, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$8,700.00 Turn/Key #599
Watch Engine 598B on the Dyno.
596
602
Pro/Street 331 Small Block Ford
650 Horsepower, 302 Block, 4340 Forged Steel Crank, H-Beam Steal Rods, Forged 8.5 to 1 Compression Pistons, Comp Roller Cam and Lifters, Polished Aluminum Heads, Polished Intake, Polished 671 Supercharger, Pair of Holley Boost Reference Blower Carbs, Linkage, Fuel Lines, Polished Dual Carb Scoop, Mallory Ignition, Waterpump and Billet Overdrive Waterpump Pulley, Set up, Run, Synchronized and Dynoed.
$13,700.00 Turn/Key #601B
Pro/Street "Show Off"
545 Horsepower, 355 Cubic Inch Small Block Chevy, GM 4-Bolt Main Block, Forged 8 to 1 Compression Blower Pistons, Double Keyed Aftermarket Balancer, Double Keyed Eagle Cast Steel Crank, Eagle Rods, Complete Rotating Assembly Balanced, Comp Cams Hydraulic Roller Cam and Lifters, Polished 64cc Aluminum Heads, ARP Screw-in Studs and Guide Plates, Manley Stainless Steel Valves, Comp Cams Chrome Moly Retainers and Locks, ARP Headbolts, Roller Rockers, Polished Aluminum Valve Covers, Polished Aluminum Oil Pan and Aluminum Timing Cover, Polished Intake, Stainless Steel Hardware, Billet Blower Shop 671 Supercharger, Billet Drive Pulleys, Snout Idler, Funnycar Style Belt Guard, 2 Polished Edelbrock 750 Carbs, Stainless Steel Linkage, Fuel Lines, Polished Dual Carb Scoop with K&N Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$10,610.00 Turn/Key #602
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
605
461 Inch Big Block Chevy
675 Horsepower, 4-Bolt Main, Steel Crank, Eagle 7/16 Rods with ARP Rod Bolts, Complete Rotating Assembly Balanced, Comp Cams 650/650 Roller Cam, 4340 Steel Crank, Polished Aluminum Heads, Manley Stainless Steel Valves, Comp Cams Springs, 10° Chrome Moly Retainers & Locks, Jomar Stud Girdles, Chrome Moly Pushrods, Dual Carb Scoop & Filters, 671 Supercharger, Holley 750 Blower Carbs, Belt Guard, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$12,750.00 Turn/Key #604A
572 Cubic Inch Pro/Street
939 HP Big Block Chevy

Dart 4-Bolt Main Block, Eagle 4340 Forged Steel Crank, Eagle H Beam Steel Rods, Complete Rotating Assembly Balanced, JE Forged 8.5 to 1 Compression, 651/651 Comp Roller Cam, Roller Lifters, Polished CNC Ported 360cc Aluminum Heads, Jomar Stud Girdles, Polished 871 Supercharger, 2 1050 Dominator Carbs, BDS Monster Scoop with K&N Filters, Linkage, Fuel Lines, Moroso Oil Pan, Funnycar Style Belt Guard, MSD Ignition, Set up, Run, Synchronized and Dynoed.
$21,750.00 Turn/Key #605
608
Pro/Street 461 Cubic Inch
715 Horsepower, 4-Bolt Main Block, 4340 Steel Crank, H Beam Steel Rods, Complete Rotating Assembly Balanced, H Series Bearings, Forged 8.5 to 1 Compression Pistons, Comp Cams 651/651 Roller Cam, Double Roller Timing Chain & Gears, Polished Aluminum Timing Cover, Chrome Oil Pan, Polished 115cc Rectangular Port Aluminum Heads, Manley 225-188 Stainless Steel Valves, 10° Chrome Moly Retainers & Locks, ARP Screw in Studs, Jomar Stud Girdles, Comp Cams Guide Plates, ARP Head Bolts, Comp Cams Pro Magnum Stainless Roller Rockers, Comp Cams Hardened Pushrods, Chrome Tall Valve Covers, Polished Intake, Stainless Hardware, Polished 871 Supercharger, 3” Billet Drive, Funnycar Style Belt Guard, Pair of Holley 950 Blower Carbs, Linkage, Fuel Lines, Polished Scoop with K&N Filters, Mallory Distributor, Set up, Run, Synchronized and Dynoed.
$
13,050.00 Turn/Key #607A
775 HP 526 Cubic Inch
Big Block Chrysler Pro/Street Bad Boy

Mopar 440 Block, 4340 Stroker Crank, H-Beam Steel Rods, Complete Rotating Assembly Balanced, H Series Bearings, Comp Cams Roller Cam & Lifters, J-E Forged 8.5 to 1 Compression Pistons, File Fit Rings, Polished Aluminum Heads, Manley Stainless Steel Valves, Chrome Moly Retainers & Locks, Comp Cams Springs, Chrome Moly Bushed Shaft Roller Rockers, Mopar Performance Aluminum Valve Covers, Polished BDS Blower Intake, 871 Supercharger, 3” Drive, Funnycar Style Belt Guard, 8mm Pulleys & Belt, Pair of Holley 950 Blower Carbs, Linkage, Fuel Lines, Polished Scoop with K&N Filters, Polished Waterpump and Overdrive, Waterpump Pulley, Mallory Ignition,Set up, Run, Synchronized and Dynoed.
$16,950.00 Turn/Key #608
609 610
Pro/Street 355
530 Horsepower, GM 350 4 Bolt Main Block, Bored .030 with Forged 8 to 1 Compression Pistons, Double Keyed Eagle Cast Steel Crank, Aftermarket Balancer, Eagle Rods, Complete Rotating Assembly Balanced, Comp Cams Hydraulic Roller Cam and Lifters, Polished Aluminum Heads, Manley Stainless Steel Valves, Comp Cams Springs and Chrome Moly Retainers and Locks, ARP Screw in Studs and Guideplates, ARP Head Bolts, Stainless Steel Roller Rockers, Polished Intake with Stainless Hardware, Blowershop Polished 671 Supercharger, Funnycar Style Belt Guard, 2 Holley 750 Blower Carbs with Boost Reference, Linkage, Fuel Lines, Dual Carb Scoop with K&N Filters, Set up, Run, Synchronized and Dynoed.
$10,632.00 Turn/Key #609
Add $150.00 for Aluminum Oil Pan, Timing Cover and Valve Covers instead of Chrome.
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
Chevy Pro/Street 4.3 V6
410 Horsepower, 8 to 1 Compression, Forged Blower Pistons, Eagle Cast Steel Crank and Eagle Rods, Aftermarket Balancer, ARP Rod Bolts, Complete Rotating Assembly Balanced, Comp Cams Hydraulic Roller Cam & Lifters, Stainless Steel Valves, Chrome Moly Retainers & Locks, Comp Cams Valve Springs, Fully Polished 471 Supercharger, 3” Drive Pulleys & Belt, 750 CFM Edelbrock Carb, Mallory Ignition, Funnycar Style Beltguard, Set up, Run, Synchronized and Dynoed.
$
9,875.00 Turn/Key #610
608 605
461 Inch Big Block Chevy
501 Horsepower, 454 Block Bored .030, Forged Flat Top 9 to 1 Compression Piston, Flat Top 9 to 1 Compression Piston,Eagle Cast Steel Crank, Eagle 7/16 Rods, ARP Main Bolts, Complete Rotating Assembly Balanced, Comp Cams Hydraulic Cam & Lifters, Double Roller Comp Cams Timing Chain and Gears, Aftermarket Balancer, Polished Rectangular Port Aluminum Heads, Manley Stainless Steel Valves, 10° Chrome Moly Retainers and Locks, ARP Screw in Studs, Comp Cams Guideplates, Comp Cams Pushrods, Polished Dual Plane Intake, Edelbrock 800 CFM Polished Carb, Mallory Distributor, Set up, Run, Synchronized and Dynoed.
$8,500.00 Turn/Key#611
Pro/Street Bad Ass
572 Inch Big Block Chevy
1008 Horsepower

Dart Block with Billet 4 Bolt Main, 4340 Double Keyed Steel Crank, Aftermarket SFI Balancer, Complete Rotating Assembly Balanced, H-Beam Steel Rods, JE 8.5 to 1 Compression Forged Pistons, Clevite H Series Bearings, Speedpro File Fit Rings, Comp Cams 673/673 Roller Cam, Roller Lifters, Double Roller Timing Chain and Gears, Moroso Oil Pan, Melling Oil Pump, CNC 360cc Polished Aluminum Heads, Manley Stainless Steel Valves, Comp Cam Springs, ARP Screw in Studs, Jomar Stud Girdles, Comp Cams Pushrods and Guideplates, ARP Head Bolts, Polished Aluminum Timing Cover, Polished Blowershop Intake, Billet 1071 Blowershop Teflon Stripped Supercharger, Billet 3” 8mm Drive, 1 to 1 Ratio, Funnycar Style Beltguard, Pair of 1250 Holley Dominator Carbs, Fuel Lines, Linkage, Monster Scoop with K&N Filters, Mallory Ignition, Engine Transport Stand,Set up, Run, Synchronized and Dynoed.
$25,750.00 Turn/Key #612

468 Inch Big Block Chevy
701 Horsepower

Eagle Cast Steel Crank, Eagle 7/16 Rods, ARP Main Bolts, Forged 8.2 to 1 Compression Speed Pro Blower Pistons, Complete Assembly Balanced and Blueprinted, Comp Cams 650/650 Roller Cam, Comp Roller Lifters, Double Roller Comp Timing Chain and Gears, File Fit Moly Rings, Aluminum Timing Cover, Chrome Oil Pan, Polished 115cc Rectangular Port Aluminum Heads, Manley Stainless Steel Valves, 10° Chrome Moly Retainers and Locks, ARP Screw In Studs, Jomar Stud Girdles, Comp Cams Guideplates, Comp Cams Hardened Pushrods, ARP Head Bolts, Comp Cams Chrome Moly Roller Rockers, Cast Aluminum Valve Covers, Polished Intake with Stainless Hardware, 671 Supercharger, 3” Comp Drive Pulleys & Belt, Funny Car Style Belt Guard, Pair of Holley Boost Reference 950 CFM Blower Carbs, Linkage, Fuel Lines, Mallory Electronic Distributor, BDS Dual Carb Scoop with K&N Filters, Set up, Run, Synchronized and Dynoed.
$12,500.00 Turn/Key #613A
The Ultimate Bad Ass
572 Inch Supercharged Big Block Chevy

1,049 Horsepower @ 6401 rpm, Full Polished Dart Aluminum Block, 4340 Double Keyed Stroker Crank, H-Beam Steel Rods, JE 8.5 to 1 Compression Forged Pistons, Complete Rotating Assembly Balanced, Plazma Moly File Fit Rings, Comp Cams 673/673 Roller Cam, Roller Lifters, Moroso Oil Pan, Cometic Head Gaskets, CNC Ported 360cc Polished Rectangular Port Aluminum Heads, Manley Stainless Steel Valves, Comp Cams Screw in Studs and Guideplates, Jomar Stud Girdles, ARP Head Bolts, Comp Cams Roller Rockers, Stud Girdles, Aluminum Valve Covers, Polished Blowershop Intake and Stainless Hardware, Billet 1071 Blowershop Supercharger, 3" 8mm Comp Drive, Funnycar Style Beltguard, Pair of Holley 1250 Ultra Dominator Carbs, Fuel Lines, Linkage, BDS Monster Scoop, MSD 85561 Distributor, Set up, Run, Synchronized and Dynoed.
$28,500.00 Turn/Key #614
605
Pro/Street 408 Inch
FORD Stroker

602 Horsepower, Blueprinted 351 Windsor Block, Main Girdle, 4340 Double Keyed Steel Crank, H-Beam Steel Rods, JE Forged 8.5 to 1 Compression Pistons, File Fit Rings, H-Series Clevite Bearings, Complete Rotating Assembly Balanced, Comp Cams 660/660 Roller Cam, Roller Lifters, Double Roller Timing Chain and Gears, Aluminum Waterpump and Billet Overdrive, Waterpump Pulley, Polished Aluminum Heads, Manley Stainless Steel Valves, Comp Cams Valve Springs, Retainers and Locks, ARP Head Bolts, ARP Screw In Studs and Guide Plates, Comp Cams Stainless Steel Roller Rockers, Jomar Stud Girdles, Ford Racing Cast Aluminum Valve Covers, Mallory Ignition, BDS Polished Intake, Polished 871 Supercharger, 3" Drive, Pair of Holley 750 Boost Reference Blower Carbs, Linkage, Fuel Lines, Funnycar Style Beltguard, BDS Dual Carb Scoop with K&N Filters, Set up, Run, Synchronized and Dynoed.
$16,050.00 Turn/Key #615
408 Cubic Inch
Small Block Chevy Bad Boy
775 Horsepower

Dart 4-Bolt Main Block, 4340 Forged Steel Crank, H-Beam Steel Rods, JE Forged 8.5 to 1 Compression Pistons, Complete Assembly Blueprinted and Internal Balanced, File Fit Moly Rings, Clevite H Series Bearings, Billet Comp Cams 652/652 Roller Cams and Stainless Steel Rockers, Roller Lifters, Polished Dart Pro I Aluminum Heads, Manley Severe Duty Valves, 10º Chrome Moly Retainers and Locks, Jomar Stud Girdles, Moroso 7 qt. Oil Pan, Blowershop Polished Raised Port Intake, 871 Supercharger, 3” Drive Pulleys and Belt, Pair of Holley 950 Boost Reference Blower Carbs, Fuel Lines, Linkage, Dual Carb Scoop with K&N Filters, Mallory Ignition, Set up, Run, Synchronized and Dynoed.
$15,750.00 Turn/Key #616
Watch Engine 616 on the Dyno.
 
408 Cubic Inch Mopar Small Block
Another Bad Ass Creation
691+ Horsepower, 630 ft. lbs. of Torque

360 Mopar Block, Main Girdle, Double Keyed 4340 Eagle Steel Stroker Crank, Aftermarket Double Keyed Balancer, H-Beam Steel Rods, 8.5 to 1 Compression JE Forged Pistons, File Fit Speed Pro Moly Rings, H Series Rod and Main Bearings, Melling High Pressure Oil Pump, Moroso Oil Pan and Pickup, Polished Edelbrock Aluminum Heads, ARP Head Bolts, Comp Cams Shaft Roller Rockers, Stainless Steel Valves, Comp Cams Springs, Chrome Moly Retainers and Locks, Comp Cams 663/648 Billet Roller Cam and Lifters, Double Roller Timing Chain and Gears, BDS Polished Blower Intake, Blowershop Billet 671 Supercharger, 3 Inch Drive Pulleys and Belt, Funnycar Style Beltguard, Pair of Holley Boost Reference 750 Blower Carbs, Linkage, Fuel Lines, Polished Dual Carb Scoop with K&N Filters, Mallory Electronic Distributor, Waterpump with Overdrive Waterpump Pulley, Set up, Run, Synchronized and Dynoed.
$15,650.00 Turn/Key #619
Low Profile
Supercharged 355 Chevy
450 Horsepower, GM 350 4 Bolt Main Block, Eagle Cast Steel Double Keyed Crank, ARP Main Bolts, Eagle I Beam Rods, Forged 8.5 to 1 Compression Blower Pistons, Comp Cams Hydraulic Roller Cam and Lifters, Polished 64cc Aluminum Heads, 202 160 Manley Stainless Steel Valves, Comp Cams Springs, Chrome Moly Retainers and Locks, ARP Screw in Studs, Stainless Steel Roller Rockers, Double Roller Comp Cams Timing Chains and Gears, Aluminum Timing Cover, Aluminum Oil Pan, Aluminum Valve Covers, Polished Weiand 144 Supercharger, Holley Boost Reference Blower Carb, Mallory Electronic Distributor, Set up, Run, Synchronized and Dynoed.
$10,260.00 Turn/Key #620
Add $875 to upgrade to a new Dart SHP 4-Bolt Main Block.
 
Pump Gas Bad Ass
632 Big Block Chevy
1,306+ HP @ 6,431 rpm
1166 ft lbs Torque @ 4,521rpm

Dart Block, Callies Magnum Crank, Callies Super H-Beam Steel Rods, JE Forged 8.5 to 1 Compression Pistons, File Fit Rings, Comp Cams Roller Cam 702/714-276/282, Polished CNC 355 Dart Pro 1 Heads, Manley Stainless Steel Valves, Comp Cams Springs, Chrome Moly Retainers and Locks, Polished Blowershop Intake, BDS 1471 Pro Lock Supercharger, Pair of 1250 Ultra Dominator Carbs, MSD Ignition, Linkage, Fuel Lines, Funny Car Style Belt Guard, Dual Carb Scoop with K&N Filters, Polished High Flow Water Pump and Billet Overdrive Pulley, Set up, Run, Synchronized and Dynoed.
$39,750.00 Turn/Key #621A
Click on the engines
for an enlarged view.


Black GM TH400 Transmission
BlackTH400 Transmission
with Full Manual Valvebody.
$2,995.00PA#256B
Polished GM TH400 Transmission
Full Polished TH400 Transmission
with Full Manual Valvebody.
$4,195.00PA#256

Call for a FREE catalog (860) 354-3237 Fax: (860) 350-2023 Email Us
(Call during shop hours: Monday - Friday 8am - 5pm, Saturday 8am - 1pm)


Credit Cards for US Sales ONLY! All Others Wire Transfer or Cash Only.

Big Al's Toy Box is a BBB Accredited Business. Click for the BBB Business Review of this Auto Parts & Supplies - Wholesale & Manufacturers in Gaylordsville CT  

Website Design by KatArt Graphics